Open Access Research Article

Edina Rusen, Alexandra Mocanu, Florica Rizea, Paul O. Stanescu, Aurel Diacon, Ioan Calinescu, Marius Dragoescu Post-consumer PET Bottles Recycling III. Obtaining of unsaturated polyester resins and mechanical characterization of cross-linked materials with styrene

DOI Not yet assigned
Published 30 Jun 2014

Abstract

Poly(ethylene terephthalate) PET was subject to a glycolysis process using diethylene glycol (PET/DEG = 1/1 molar ratio) and zinc acetate as trans-esterification catalyst. An unsaturated polyester resin was then prepared using the glycolysis product and maleic anhydride. The molecular weights of glycolysed PET products and polyester resin were investigated using gel permeation chromatography (GPC) analysis. A cross-linking reaction of the unsaturated polyester resin was performed in the presence of styrene (different amounts) at 80°C. The compression and impact strength/resistance properties of the cured resins were determined. Keywords: PET waste, glycolysis, GPC, unsaturated polyester resin, mechanical properties

How to Cite this Article

(2014). Edina Rusen, Alexandra Mocanu, Florica Rizea, Paul O. Stanescu, Aurel Diacon, Ioan Calinescu, Marius Dragoescu Post-consumer PET Bottles Recycling III. Obtaining of unsaturated polyester resins and mechanical characterization of cross-linked materials with styrene. Materiale Plastice, 51(2).
. Edina Rusen, Alexandra Mocanu, Florica Rizea, Paul O. Stanescu, Aurel Diacon, Ioan Calinescu, Marius Dragoescu Post-consumer PET Bottles Recycling III. Obtaining of unsaturated polyester resins and mechanical characterization of cross-linked materials with styrene. Materiale Plastice. 2014;51(2).
, "Edina Rusen, Alexandra Mocanu, Florica Rizea, Paul O. Stanescu, Aurel Diacon, Ioan Calinescu, Marius Dragoescu Post-consumer PET Bottles Recycling III. Obtaining of unsaturated polyester resins and mechanical characterization of cross-linked materials with styrene,” Materiale Plastice, vol. 51, no. 2, 2014.
✓ Copied to clipboard