ZUZANA SOMSAKOVA, JOZEF ZAJAC, PETER MICHALIK, MAREK KASINA Machining of Wood Plastic Composite (Pilot Experiment)

Open Access Research Article

ZUZANA SOMSAKOVA, JOZEF ZAJAC, PETER MICHALIK, MAREK KASINA Machining of Wood Plastic Composite (Pilot Experiment)

DOI Not yet assigned

Issue Vol. 49, No. 1

Abstract

The paper deals with a comparison of the surface roughness of WPC (Wood Plastic Composite) after the machining (turning). Turning was performed with constant speed rotation and constant depth of cut. The goal of this paper was the observed change of average maximum height Rz (roughness average Ra) with change of feeds (interval of feed f=0.1 to 0.61mm) and design recommendations resulting from acquired knowledge. Keywords: Wood Plastic Composite, machining, surface roughness

How to Cite this Article

(2012). ZUZANA SOMSAKOVA, JOZEF ZAJAC, PETER MICHALIK, MAREK KASINA Machining of Wood Plastic Composite (Pilot Experiment). Materiale Plastice, 49(1).

. ZUZANA SOMSAKOVA, JOZEF ZAJAC, PETER MICHALIK, MAREK KASINA Machining of Wood Plastic Composite (Pilot Experiment). Materiale Plastice. 2012;49(1).

, "ZUZANA SOMSAKOVA, JOZEF ZAJAC, PETER MICHALIK, MAREK KASINA Machining of Wood Plastic Composite (Pilot Experiment),” Materiale Plastice, vol. 49, no. 1, 2012.

✓ Copied to clipboard