ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER NEWS, EVENTS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 60, 2023
   Volume 59, 2022
   Volume 58, 2021
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2020, Volume 57, Issue 4, 13-20

https://doi.org/10.37358/MP.20.4.5402

Sebastian Balos, Branislava Petronijevic Sarcev, Ivan Sarcev, Petar Janjatovic, Branka Pilic, Tatjana Balos

Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles


Abstract:
The most significant disadvantage of cold cured poly (methyl methacrylate) - PMMA is its poor mechanical properties, mainly in flexure. The aim of this work is to explore the modulus and flexural strength of modified cold cured PMMA modified with low TiO2 addition, which can also have antibacterial properties. Commercial cold cured PMMA resin, consisting of powder and liquid components, were modified by adding 0.05 %, 0.2 %, and 1.5 wt. % 20 nm hydrophobic TiO2. The specimen's flexural modulus and strength were tested, while heat properties were determined with DSC analysis. SEM and EDX were used to study fracture surfaces of tested specimens. In all modified specimens, an increased flexural modulus and flexural strength were recorded. In all specimens, the appearance of agglomerates was noted. Glass transition temperatures also increased, as the result of the appearance of polymer chains with reduced mobility around nanoparticles. 0.2 % of 20 nm TiO2 nanoparticle content proved to be the most efficient in increasing flexural modulus and strength.


Keywords:
Cold cured poly(methyl methacrylate); nano TiO2; flexural modulus; flexural strength

Issue: 2020 Volume 57, Issue 4
Pages: 13-20
Publication date: 2021/1/6
https://doi.org/10.37358/MP.20.4.5402
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
Citation Styles
Cite this article as:
BALOS, S., SARCEV, B.P., SARCEV, I., JANJATOVIC, P., PILIC, B., BALOS, T., Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles, Mater. Plast., 57(4), 2020, 13-20. https://doi.org/10.37358/MP.20.4.5402

Vancouver
Balos S, Sarcev BP, Sarcev I, Janjatovic P, Pilic B, Balos T. Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles. Mater. Plast.[internet]. 2020 Dec;57(4):13-20. Available from: https://doi.org/10.37358/MP.20.4.5402


APA 6th edition
Balos, S., Sarcev, B.P., Sarcev, I., Janjatovic, P., Pilic, B. & Balos, T. (2020). Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles. Materiale Plastice, 57(4), 13-20. https://doi.org/10.37358/MP.20.4.5402


Harvard
Balos, S., Sarcev, B.P., Sarcev, I., Janjatovic, P., Pilic, B., Balos, T. (2020). 'Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles', Materiale Plastice, 57(4), pp. 13-20. https://doi.org/10.37358/MP.20.4.5402


IEEE
S. Balos, B.P. Sarcev, I. Sarcev, P. Janjatovic, B. Pilic, T. Balos, "Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles". Materiale Plastice, vol. 57, no. 4, pp. 13-20, 2020. [online]. https://doi.org/10.37358/MP.20.4.5402


Text
Sebastian Balos, Branislava Petronijevic Sarcev, Ivan Sarcev, Petar Janjatovic, Branka Pilic, Tatjana Balos,
Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles,
Materiale Plastice,
Volume 57, Issue 4,
2020,
Pages 13-20,
ISSN 2668-8220,
https://doi.org/10.37358/MP.20.4.5402.
(https://revmaterialeplastice.ro/Articles.asp?ID=5402)
Keywords: Cold cured poly(methyl methacrylate); nano TiO2; flexural modulus; flexural strength


RIS
TY - JOUR
T1 - Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles
A1 - Balos, Sebastian
A2 - Sarcev, Branislava Petronijevic
A3 - Sarcev, Ivan
A4 - Janjatovic, Petar
A5 - Pilic, Branka
A6 - Balos, Tatjana
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2020
VL - 57
IS - 4
SP - 13
EP - 20
UR - https://doi.org/10.37358/MP.20.4.5402
KW - Cold cured poly(methyl methacrylate)
KW - nano TiO2
KW - flexural modulus
KW - flexural strength
ER -


BibTex
@article{MatPlast2020P13,
author = {Balos Sebastian and Sarcev Branislava Petronijevic and Sarcev Ivan and Janjatovic Petar and Pilic Branka and Balos Tatjana},
title = {Flexural Modulus and Strength of Cold Cured Poly(methylmethacrylate) Reinforced with TiO2 Nano Particles},
journal = {Materiale Plastice},
volume = {57},
number = {4},
pages = {13-20},
year = {2020},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.20.4.5402},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5402}
}


Downloads number: 59
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License