Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study

Prada, Andrei; Blaga, Florin; Mihaila, Stefan; Agud, Mihai

Andrei Prada, Florin Blaga, Stefan Mihaila, Mihai Agud

Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study

Abstract:
In this paper, the authors propose to carry out a case study, on a visual part made of thermoplastic material from the automotive industry. Using the most up-to-date CAE systems, we will try to highlight the main appearance problems in long parts, namely the appearance of weld lines at the meeting of the flow fronts. The part will be processed using sequential, as well as non-sequential injection systems, respectively, in order to highlight the difference between the two, respectively to compare these two tests with the results of rheological simulation (CAE).

Keywords:
CAE systems; rheology; sequential injection; weld lines; injection systems

Issue: 2023 Volume 60, Issue 2

Pages: 121-133

Publication date: 2023/7/3

https://doi.org/10.37358/MP.23.2.5668

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
PRADA, A., BLAGA, F., MIHAILA, S., AGUD, M., Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study, Mater. Plast., 60(2), 2023, 121-133. https://doi.org/10.37358/MP.23.2.5668

Vancouver
Prada A, Blaga F, Mihaila S, Agud M. Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study. Mater. Plast.[internet]. 2023 Apr;60(2):121-133. Available from: https://doi.org/10.37358/MP.23.2.5668

APA 6th edition
Prada, A., Blaga, F., Mihaila, S. & Agud, M. (2023). Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study. Materiale Plastice, 60(2), 121-133. https://doi.org/10.37358/MP.23.2.5668

Harvard
Prada, A., Blaga, F., Mihaila, S., Agud, M. (2023). 'Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study', Materiale Plastice, 60(2), pp. 121-133. https://doi.org/10.37358/MP.23.2.5668

IEEE
A. Prada, F. Blaga, S. Mihaila, M. Agud, "Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study". Materiale Plastice, vol. 60, no. 2, pp. 121-133, 2023. [online]. https://doi.org/10.37358/MP.23.2.5668

Text
Andrei Prada, Florin Blaga, Stefan Mihaila, Mihai Agud,
Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study,
Materiale Plastice,
Volume 60, Issue 2,
2023,
Pages 121-133,
ISSN 2668-8220,
https://doi.org/10.37358/MP.23.2.5668.
(https://revmaterialeplastice.ro/Articles.asp?ID=5668)
Keywords: CAE systems; rheology; sequential injection; weld lines; injection systems

RIS
TY - JOUR
T1 - Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study
A1 - Prada, Andrei
A2 - Blaga, Florin
A3 - Mihaila, Stefan
A4 - Agud, Mihai
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2023
VL - 60
IS - 2
SP - 121
EP - 133
UR - https://doi.org/10.37358/MP.23.2.5668
KW - CAE systems
KW - rheology
KW - sequential injection
KW - weld lines
KW - injection systems
ER -

BibTex
@article{MatPlast2023P121,
author = {Prada Andrei and Blaga Florin and Mihaila Stefan and Agud Mihai},
title = {Experimental Research Regarding the Defects Occurring at the Injection-molding of Long Technical Parts, Made of Thermoplastic Material, Using CAE Systems. Case Study},
journal = {Materiale Plastice},
volume = {60},
number = {2},
pages = {121-133},
year = {2023},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.23.2.5668},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5668}
}

Download article Citations: