Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging

Fidan, Muhammet

Muhammet Fidan

Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging

Abstract:
The purpose of this study was to evaluate the effect of finishing/polishing systems on the translucency parameter (TP) of resin composites after accelerated artificial aging (AAA). Four composite resins (Filtek Z250, Admira, IPS Empress Direct, Clearfil Majesty Esthetic) were evaluated. Thirty samples were prepared with each resin composite and divided into three subgroups: control (Mylar strip), disc (Optidisc), and rubber (Dimanto) (n=10). The spectrophotometer was used to determine color measurements. TP was calculated the using the CIEDE 2000 formula. Data were analyzed using Generalized Lineer Model (p<0.05). The three factors (composite resin, finishing/ polishing, and AAA) had no statistically significant influence on the TP. However, composite and finishing/polishing influenced the TP. Filtek Z250 showed the lowest TP values and the IPS Empress Direct showed the highest TP values before and after AAA. Polished groups showed higher TP values than control groups before and after AAA. IPS Empress Direct with Dimanto had higher TP values than other groups (except for IPS Empress Direct with Optidisc); Filtek Z250 with finishing/polishing groups showed lower TP values than other groups. Composite type and finishing/polishing systems influenced TP values. Unfinished groups exhibited lower TP values than finished groups. There was no difference in TP values between finishing/polishing systems (Dimanto and OptiDisc).

Keywords:
accelerated artificial aging; polishing; resin composite; spectrophotometer; translucency parameter

Issue: 2023 Volume 60, Issue 1

Pages: 55-61

Publication date: 2023/4/5

https://doi.org/10.37358/MP.23.1.5644

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
FIDAN, M., , Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging, Mater. Plast., 60(1), 2023, 55-61. https://doi.org/10.37358/MP.23.1.5644

Vancouver
Fidan M. Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging. Mater. Plast.[internet]. 2023 Jan;60(1):55-61. Available from: https://doi.org/10.37358/MP.23.1.5644

APA 6th edition
Fidan, M., (2023). Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging. Materiale Plastice, 60(1), 55-61. https://doi.org/10.37358/MP.23.1.5644

Harvard
Fidan, M., (2023). 'Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging', Materiale Plastice, 60(1), pp. 55-61. https://doi.org/10.37358/MP.23.1.5644

IEEE
M. Fidan, "Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging". Materiale Plastice, vol. 60, no. 1, pp. 55-61, 2023. [online]. https://doi.org/10.37358/MP.23.1.5644

Text
Muhammet Fidan,
Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging,
Materiale Plastice,
Volume 60, Issue 1,
2023,
Pages 55-61,
ISSN 2668-8220,
https://doi.org/10.37358/MP.23.1.5644.
(https://revmaterialeplastice.ro/Articles.asp?ID=5644)
Keywords: accelerated artificial aging; polishing; resin composite; spectrophotometer; translucency parameter

RIS
TY - JOUR
T1 - Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging
A1 - Fidan, Muhammet
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2023
VL - 60
IS - 1
SP - 55
EP - 61
UR - https://doi.org/10.37358/MP.23.1.5644
KW - accelerated artificial aging
KW - polishing
KW - resin composite
KW - spectrophotometer
KW - translucency parameter
ER -

BibTex
@article{MatPlast2023P55,
author = {Fidan Muhammet},
title = {Effect of Polishing Systems on Translucency Parameter of the Resin Composites after Aging},
journal = {Materiale Plastice},
volume = {60},
number = {1},
pages = {55-61},
year = {2023},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.23.1.5644},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5644}
}

Download article Citations: