Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder

Radoi, Alexandru Ioan; Ciuca, Ion; Stanescu, Marius Marinel; Bolcu, Dumitru; Nicolicescu, Claudiu; Miritoiu, Cosmin Mihai; Bogdan, Mihaela

Alexandru Ioan Radoi, Ion Ciuca, Marius Marinel Stanescu, Dumitru Bolcu, Claudiu Nicolicescu, Cosmin Mihai Miritoiu, Mihaela Bogdan

Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder

Abstract:
In this paper some mechanical characteristics of a composite made from a hybrid resin and reinforced with corn cob powder are presented. The hybrid resin was made with a combination between the natural dammar resin combined with a small percentage of acrylic one. The synthetic resin was inserted in order to increase the polymerization process which was produced in about 24 h. In the fist part of the investigation, from the compression test, some mechanical characteristics are determined, such as: breaking strength or maximum force obtained at breaking. Then, by using the SEM analysis and EDS spectrometry, some samples with 50% dammar and 60% dammar were investigated. The last hybrid resin test was Shore D hardness and it was found out that the hardness decreases with the increase of dammar percentage. In the last part of the study, some composites by using the poposed hybrid resin reinforced with corn cob powder were manufactured. It has been found out that the proposed composite reinforced with corn cob powder has increased compression mechanical properties compared other composites that have the same reinforcement.

Keywords:
dammar resin; acrylic resin; corn cob; powder; mechanical properties

Issue: 2022 Volume 59, Issue 2

Pages: 24-31

Publication date: 2022/7/1

https://doi.org/10.37358/MP.22.2.5581

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
RADOI, A.I., CIUCA, I., STANESCU, M.M., BOLCU, D., NICOLICESCU, C., MIRITOIU, C.M., BOGDAN, M., Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder, Mater. Plast., 59(2), 2022, 24-31. https://doi.org/10.37358/MP.22.2.5581

Vancouver
Radoi AI, Ciuca I, Stanescu MM, Bolcu D, Nicolicescu C, Miritoiu CM, Bogdan M. Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder. Mater. Plast.[internet]. 2022 Apr;59(2):24-31. Available from: https://doi.org/10.37358/MP.22.2.5581

APA 6th edition
Radoi, A.I., Ciuca, I., Stanescu, M.M., Bolcu, D., Nicolicescu, C., Miritoiu, C.M. & Bogdan, M. (2022). Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder. Materiale Plastice, 59(2), 24-31. https://doi.org/10.37358/MP.22.2.5581

Harvard
Radoi, A.I., Ciuca, I., Stanescu, M.M., Bolcu, D., Nicolicescu, C., Miritoiu, C.M., Bogdan, M. (2022). 'Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder', Materiale Plastice, 59(2), pp. 24-31. https://doi.org/10.37358/MP.22.2.5581

IEEE
A.I. Radoi, I. Ciuca, M.M. Stanescu, D. Bolcu, C. Nicolicescu, C.M. Miritoiu, M. Bogdan, "Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder". Materiale Plastice, vol. 59, no. 2, pp. 24-31, 2022. [online]. https://doi.org/10.37358/MP.22.2.5581

Text
Alexandru Ioan Radoi, Ion Ciuca, Marius Marinel Stanescu, Dumitru Bolcu, Claudiu Nicolicescu, Cosmin Mihai Miritoiu, Mihaela Bogdan,
Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder,
Materiale Plastice,
Volume 59, Issue 2,
2022,
Pages 24-31,
ISSN 2668-8220,
https://doi.org/10.37358/MP.22.2.5581.
(https://revmaterialeplastice.ro/Articles.asp?ID=5581)
Keywords: dammar resin; acrylic resin; corn cob; powder; mechanical properties

RIS
TY - JOUR
T1 - Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder
A1 - Radoi, Alexandru Ioan
A2 - Ciuca, Ion
A3 - Stanescu, Marius Marinel
A4 - Bolcu, Dumitru
A5 - Nicolicescu, Claudiu
A6 - Miritoiu, Cosmin Mihai
A7 - Bogdan, Mihaela
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2022
VL - 59
IS - 2
SP - 24
EP - 31
UR - https://doi.org/10.37358/MP.22.2.5581
KW - dammar resin
KW - acrylic resin
KW - corn cob
KW - powder
KW - mechanical properties
ER -

BibTex
@article{MatPlast2022P24,
author = {Radoi Alexandru Ioan and Ciuca Ion and Stanescu Marius Marinel and Bolcu Dumitru and Nicolicescu Claudiu and Miritoiu Cosmin Mihai and Bogdan Mihaela},
title = {Studies Regarding Some Mechanical Properties for a Hybrid Resin Used to Build Composites Reinforced with Corn Cob Powder},
journal = {Materiale Plastice},
volume = {59},
number = {2},
pages = {24-31},
year = {2022},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.22.2.5581},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5581}
}

Download article Citations: