Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite

C., Arun Prakash; R., Vimal Sam Singh; Ramachandran, Achyuth; Selvam, Anirudh

Arun Prakash C., Vimal Sam Singh R., Achyuth Ramachandran, Anirudh Selvam

Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite

Abstract:
In the recent past, the demand for multifunctional and lightweight materials have increased steadily creating an increase in demand for Hybrid polymer matrix composite which consists multiple fibers in conventional resins. In this study, a hybrid composite comprising of two reinforcements - natural silk fiber and E-Glass fiber - in an Epoxy resin matrix which is a partially eco-friendly composite has been fabricated and the effect of drilling, by using an 8 facet solid carbide drill, on the surface roughness has been studied. Taguchi’s L27 Orthogonal array was used for experimentation by modifying three parameters - feed rate, spindle speed and drill diameter - on three levels (low, medium and high) and thereby studying the effects. From the results of experimentation it has been observed that increase in spindle speed and drill diameter reduces surface roughness however it increases with increase in feed rate. Further, regression analysis and Fuzzy modeling are used in order to determine optimum parameter values to get the desired surface finish. Good agreement between the experimental, regression and fuzzy model is observed with the correlation coefficient of 0.9814 and 0.9677 respectively.

Keywords:
drilling; fuzzy modeling; hybrid polymer composite; regression modeling; surface roughness

Issue: 2022 Volume 59, Issue 1

Pages: 78-89

Publication date: 2022/4/5

https://doi.org/10.37358/MP.22.1.5561

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
C., A.P., R., V.S.S., RAMACHANDRAN, A., SELVAM, A., Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite, Mater. Plast., 59(1), 2022, 78-89. https://doi.org/10.37358/MP.22.1.5561

Vancouver
C. AP, R. VSS, Ramachandran A, Selvam A. Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite. Mater. Plast.[internet]. 2022 Jan;59(1):78-89. Available from: https://doi.org/10.37358/MP.22.1.5561

APA 6th edition
C., A.P., R., V.S.S., Ramachandran, A. & Selvam, A. (2022). Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite. Materiale Plastice, 59(1), 78-89. https://doi.org/10.37358/MP.22.1.5561

Harvard
C., A.P., R., V.S.S., Ramachandran, A., Selvam, A. (2022). 'Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite', Materiale Plastice, 59(1), pp. 78-89. https://doi.org/10.37358/MP.22.1.5561

IEEE
A.P. C., V.S.S. R., A. Ramachandran, A. Selvam, "Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite". Materiale Plastice, vol. 59, no. 1, pp. 78-89, 2022. [online]. https://doi.org/10.37358/MP.22.1.5561

Text
Arun Prakash C., Vimal Sam Singh R., Achyuth Ramachandran, Anirudh Selvam,
Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite,
Materiale Plastice,
Volume 59, Issue 1,
2022,
Pages 78-89,
ISSN 2668-8220,
https://doi.org/10.37358/MP.22.1.5561.
(https://revmaterialeplastice.ro/Articles.asp?ID=5561)
Keywords: drilling; fuzzy modeling; hybrid polymer composite; regression modeling; surface roughness

RIS
TY - JOUR
T1 - Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite
A1 - C., Arun Prakash
A2 - R., Vimal Sam Singh
A3 - Ramachandran, Achyuth
A4 - Selvam, Anirudh
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2022
VL - 59
IS - 1
SP - 78
EP - 89
UR - https://doi.org/10.37358/MP.22.1.5561
KW - drilling
KW - fuzzy modeling
KW - hybrid polymer composite
KW - regression modeling
KW - surface roughness
ER -

BibTex
@article{MatPlast2022P78,
author = {C. Arun Prakash and R. Vimal Sam Singh and Ramachandran Achyuth and Selvam Anirudh},
title = {Modeling and Analysis of Surface Roughness Parameters in Drilling of Silk-glass/epoxy Composite},
journal = {Materiale Plastice},
volume = {59},
number = {1},
pages = {78-89},
year = {2022},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.22.1.5561},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5561}
}

Download article Citations: