ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER NEWS, EVENTS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 61, 2024
   Volume 60, 2023
   Volume 59, 2022
   Volume 58, 2021
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2021, Volume 58, Issue 2, 91-99

https://doi.org/10.37358/MP.21.2.5481

Faruk Yesildal, Esra Kul, Ruhi Yesildal, Khamirul Amin Matori

Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added


Abstract:
Although polymethylmethacrylate (PMMA) is widely used as a denture base material, its disadvantages include low strength and low thermal conductivity. The effects on thermal conductivity, flexural strength, thermal diffusivity, and elastic modulus of adding Al2O3 and SiC powders in different volumes to PMMA were investigated. A total of 60 specimens were prepared in 10 groups (five groups for the thermal conductivity test and five groups for the flexural strength test (n:6). The specimens were immersed in water for 30 days before the testing. Thermal conductivity values were measured by the transient hot bridge (THB) method, and flexural strengths were measured by the 3-point bend test. A significant difference was found in thermal conductivity, flexural strength, thermal diffusivity and elastic modulus values between independent groups (P <0.001) using the Kruskal-Wallis test. The Kruskal Wallis 1-way ANOVA was used for the post hoc tests after Kruskal Wallis (รก=.05). The thermal conductivity of PMMA increased significantly with the addition of 15% SiC and 15% Al2O3. The flexural strength values decreased significantly with the addition of 10% SiC and 15% Al2O3. The thermal diffusivity values increased significantly with the addition of 10% and 15% SiC. The Young modulus of PMMA decreased when 10% SiC, 10% Al2O3 and 15% Al2O3 were added. Environmental scanning electron microscope (ESEM) showed that ceramic powders were dissipated in PMMA. The addition of 15% SiC powders to PMMA increased thermal conductivity without significantly reducing flexural strength. This study helped determine the optimum volumes for the use of SiC and Al2O3 powders. Knowledge of the importance of this variable will help in more effective modification of denture base resin with SiC and Al2O3 powders to improve heat transfer without adversely affecting strength.


Keywords:
flexural strength; thermal conductivity; polymethylmethacrylate

Issue: 2021 Volume 58, Issue 2
Pages: 91-99
Publication date: 2021/7/5
https://doi.org/10.37358/MP.21.2.5481
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
Citation Styles
Cite this article as:
YESILDAL, F., KUL, E., YESILDAL, R., MATORI, K.A., Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added, Mater. Plast., 58(2), 2021, 91-99. https://doi.org/10.37358/MP.21.2.5481

Vancouver
Yesildal F, Kul E, Yesildal R, Matori KA. Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added. Mater. Plast.[internet]. 2021 Apr;58(2):91-99. Available from: https://doi.org/10.37358/MP.21.2.5481


APA 6th edition
Yesildal, F., Kul, E., Yesildal, R. & Matori, K.A. (2021). Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added. Materiale Plastice, 58(2), 91-99. https://doi.org/10.37358/MP.21.2.5481


Harvard
Yesildal, F., Kul, E., Yesildal, R., Matori, K.A. (2021). 'Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added', Materiale Plastice, 58(2), pp. 91-99. https://doi.org/10.37358/MP.21.2.5481


IEEE
F. Yesildal, E. Kul, R. Yesildal, K.A. Matori, "Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added". Materiale Plastice, vol. 58, no. 2, pp. 91-99, 2021. [online]. https://doi.org/10.37358/MP.21.2.5481


Text
Faruk Yesildal, Esra Kul, Ruhi Yesildal, Khamirul Amin Matori,
Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added,
Materiale Plastice,
Volume 58, Issue 2,
2021,
Pages 91-99,
ISSN 2668-8220,
https://doi.org/10.37358/MP.21.2.5481.
(https://revmaterialeplastice.ro/Articles.asp?ID=5481)
Keywords: flexural strength; thermal conductivity; polymethylmethacrylate


RIS
TY - JOUR
T1 - Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added
A1 - Yesildal, Faruk
A2 - Kul, Esra
A3 - Yesildal, Ruhi
A4 - Matori, Khamirul Amin
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2021
VL - 58
IS - 2
SP - 91
EP - 99
UR - https://doi.org/10.37358/MP.21.2.5481
KW - flexural strength
KW - thermal conductivity
KW - polymethylmethacrylate
ER -


BibTex
@article{MatPlast2021P91,
author = {Yesildal Faruk and Kul Esra and Yesildal Ruhi and Matori Khamirul Amin},
title = {Investigation of the Thermal Conductivity and Flexural Strength of Polymethylmethacrylate Denture Base Material with SiC and Al2O3 Added},
journal = {Materiale Plastice},
volume = {58},
number = {2},
pages = {91-99},
year = {2021},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.21.2.5481},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5481}
}


Downloads number: 64
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License