Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition

Farcasiu, Titus Alexandru; Tarlungeanu, Daniela Ioana; Ciavoi, Gabriela; Todor, Liana; Dina, Magdalena Natalia; Andrei, Oana Cella; Farcasiu, Catalina

Titus Alexandru Farcasiu, Daniela Ioana Tarlungeanu, Gabriela Ciavoi, Liana Todor, Magdalena Natalia Dina, Oana Cella Andrei, Catalina Farcasiu

Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition

Abstract:
The purpose of this study was to investigate changes of superficial topography and wettability of two injection-type denture base materials following low pressure plasma treatment. Samples of denture base materials (Polyan and Biodentaplast) were fabricate using dedicated technology and were exposed to plasma treatment. Resin surface topography and rugosity were evaluated using SEM and AFM, while wettability was determined through contact angle measurements. Artificial saliva was the testing liquid. Initial contact angles for the two materials are close (Biodentaplast-37.60°, Polyan-36.75°). Plasma treatment halves the values of the contact angle. 30-days measurement reveals a reduced bounce-back effect (Biodentaplast-20.68°, Polyan-20.11°). Surface topography modified differently for the two materials. Rugosity increased significantly for both materials (p<0.05). Surface rugosity values pre- and post-plasma treatment respect the biological threshold of fungal adhesion. Plasma exposure increased injection-type denture base materials wettability with artificial saliva and surface roughness. Injection-type denture base materials and artificial saliva can enhance prosthetic experience of xerostomic patients.

Keywords:
vapor plasma deposition; denture base; wettability; roughness

Issue: 2021 Volume 58, Issue 2

Pages: 1-7

Publication date: 2021/7/5

https://doi.org/10.37358/MP.21.2.5472

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
FARCASIU, T.A., TARLUNGEANU, D.I., CIAVOI, G., TODOR, L., DINA, M.N., ANDREI, O.C., FARCASIU, C., Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition, Mater. Plast., 58(2), 2021, 1-7. https://doi.org/10.37358/MP.21.2.5472

Vancouver
Farcasiu TA, Tarlungeanu DI, Ciavoi G, Todor L, Dina MN, Andrei OC, Farcasiu C. Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition. Mater. Plast.[internet]. 2021 Apr;58(2):1-7. Available from: https://doi.org/10.37358/MP.21.2.5472

APA 6th edition
Farcasiu, T.A., Tarlungeanu, D.I., Ciavoi, G., Todor, L., Dina, M.N., Andrei, O.C. & Farcasiu, C. (2021). Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition. Materiale Plastice, 58(2), 1-7. https://doi.org/10.37358/MP.21.2.5472

Harvard
Farcasiu, T.A., Tarlungeanu, D.I., Ciavoi, G., Todor, L., Dina, M.N., Andrei, O.C., Farcasiu, C. (2021). 'Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition', Materiale Plastice, 58(2), pp. 1-7. https://doi.org/10.37358/MP.21.2.5472

IEEE
T.A. Farcasiu, D.I. Tarlungeanu, G. Ciavoi, L. Todor, M.N. Dina, O.C. Andrei, C. Farcasiu, "Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition". Materiale Plastice, vol. 58, no. 2, pp. 1-7, 2021. [online]. https://doi.org/10.37358/MP.21.2.5472

Text
Titus Alexandru Farcasiu, Daniela Ioana Tarlungeanu, Gabriela Ciavoi, Liana Todor, Magdalena Natalia Dina, Oana Cella Andrei, Catalina Farcasiu,
Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition,
Materiale Plastice,
Volume 58, Issue 2,
2021,
Pages 1-7,
ISSN 2668-8220,
https://doi.org/10.37358/MP.21.2.5472.
(https://revmaterialeplastice.ro/Articles.asp?ID=5472)
Keywords: vapor plasma deposition; denture base; wettability; roughness

RIS
TY - JOUR
T1 - Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition
A1 - Farcasiu, Titus Alexandru
A2 - Tarlungeanu, Daniela Ioana
A3 - Ciavoi, Gabriela
A4 - Todor, Liana
A5 - Dina, Magdalena Natalia
A6 - Andrei, Oana Cella
A7 - Farcasiu, Catalina
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2021
VL - 58
IS - 2
SP - 1
EP - 7
UR - https://doi.org/10.37358/MP.21.2.5472
KW - vapor plasma deposition
KW - denture base
KW - wettability
KW - roughness
ER -

BibTex
@article{MatPlast2021P1,
author = {Farcasiu Titus Alexandru and Tarlungeanu Daniela Ioana and Ciavoi Gabriela and Todor Liana and Dina Magdalena Natalia and Andrei Oana Cella and Farcasiu Catalina},
title = {Injection-type Denture Base Materials Surface Modification after Vapor Plasma Deposition},
journal = {Materiale Plastice},
volume = {58},
number = {2},
pages = {1-7},
year = {2021},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.21.2.5472},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5472}
}

Downloads number: 36

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page