Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization

Earar, Kamel; Gurau, Gabriela; Stefanescu, Victorita; Carp, Gabriel Bogdan; Pavel, Liliana Lacramioara; Bosinceanu, Dan; Hurjui, Loredana Liliana; Murariu, Alice; Berbece, Sorin; Iordache, Cristina; Balos, Monica; Fulga, Iuliu; Fratila, Dragos Nicolae; Beznea, Adrian

Kamel Earar, Gabriela Gurau, Victorita Stefanescu, Gabriel Bogdan Carp, Liliana Lacramioara Pavel, Dan Bosinceanu, Loredana Liliana Hurjui, Alice Murariu, Sorin Berbece, Cristina Iordache, Monica Balos, Iuliu Fulga, Dragos Nicolae Fratila, Adrian Beznea

Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization

Abstract:
The materials used in additive techniques are initially in a plastic state so that they can be inserted into various cavities or easily molded after which they pass into a rigid phase. This process is performed by various methods, depending on the nature of the material. The study aims at analyzing the chemical and biological behavior of flexible acrylates compared to classical acrylates, whose structure was optimized through the introduction, at a structural level, of certain polymeric and antiseptic structures in view of obtaining a high degree of biocompatibility, the elements of variability consisting in the difference between the two polymerization regimes, the polymerization under pressure and the classical polymerization.The polymerization of acrylic resins by the technique of thermobaro-polymerization with injection compensation leads to the formation of materials with superior impact resistance. The pressure regime is very important, being a factor that influences the polymerization without being initiated. Breaking strength is an essential element in assessing the quality and duration of the prosthesis use.

Keywords:
Plastic material; polymerization; acrylic resins; adaptability of the base of prostheses

Issue: 2020 Volume 57, Issue 4

Pages: 353-359

Publication date: 2021/1/6

https://doi.org/10.37358/MP.20.4.5435

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
EARAR, K., GURAU, G., STEFANESCU, V., CARP, G.B., PAVEL, L.L., BOSINCEANU, D., HURJUI, L.L., MURARIU, A., BERBECE, S., IORDACHE, C., BALOS, M., FULGA, I., FRATILA, D.N., BEZNEA, A., Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization, Mater. Plast., 57(4), 2020, 353-359. https://doi.org/10.37358/MP.20.4.5435

Vancouver
Earar K, Gurau G, Stefanescu V, Carp GB, Pavel LL, Bosinceanu D, Hurjui LL, Murariu A, Berbece S, Iordache C, Balos M, Fulga I, Fratila DN, Beznea A. Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization. Mater. Plast.[internet]. 2020 Dec;57(4):353-359. Available from: https://doi.org/10.37358/MP.20.4.5435

APA 6th edition
Earar, K., Gurau, G., Stefanescu, V., Carp, G.B., Pavel, L.L., Bosinceanu, D.,... Beznea, A. (2020). Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization. Materiale Plastice, 57(4), 353-359. https://doi.org/10.37358/MP.20.4.5435

Harvard
Earar, K., Gurau, G., Stefanescu, V., Carp, G.B., Pavel, L.L., Bosinceanu, D., Hurjui, L.L., Murariu, A., Berbece, S., Iordache, C., Balos, M., Fulga, I., Fratila, D.N., Beznea, A. (2020). 'Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization', Materiale Plastice, 57(4), pp. 353-359. https://doi.org/10.37358/MP.20.4.5435

IEEE
K. Earar, G. Gurau, V. Stefanescu, G.B. Carp, L.L. Pavel, D. Bosinceanu, L.L. Hurjui, A. Murariu, S. Berbece, C. Iordache, M. Balos, I. Fulga, D.N. Fratila, A. Beznea, "Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization". Materiale Plastice, vol. 57, no. 4, pp. 353-359, 2020. [online]. https://doi.org/10.37358/MP.20.4.5435

Text
Kamel Earar, Gabriela Gurau, Victorita Stefanescu, Gabriel Bogdan Carp, Liliana Lacramioara Pavel, Dan Bosinceanu, Loredana Liliana Hurjui, Alice Murariu, Sorin Berbece, Cristina Iordache, Monica Balos, Iuliu Fulga, Dragos Nicolae Fratila, Adrian Beznea,
Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization,
Materiale Plastice,
Volume 57, Issue 4,
2020,
Pages 353-359,
ISSN 2668-8220,
https://doi.org/10.37358/MP.20.4.5435.
(https://revmaterialeplastice.ro/Articles.asp?ID=5435)
Keywords: Plastic material; polymerization; acrylic resins; adaptability of the base of prostheses

RIS
TY - JOUR
T1 - Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization
A1 - Earar, Kamel
A2 - Gurau, Gabriela
A3 - Stefanescu, Victorita
A4 - Carp, Gabriel Bogdan
A5 - Pavel, Liliana Lacramioara
A6 - Bosinceanu, Dan
A7 - Hurjui, Loredana Liliana
A8 - Murariu, Alice
A9 - Berbece, Sorin
A10 - Iordache, Cristina
A11 - Balos, Monica
A12 - Fulga, Iuliu
A13 - Fratila, Dragos Nicolae
A14 - Beznea, Adrian
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2020
VL - 57
IS - 4
SP - 353
EP - 359
UR - https://doi.org/10.37358/MP.20.4.5435
KW - Plastic material
KW - polymerization
KW - acrylic resins
KW - adaptability of the base of prostheses
ER -

BibTex
@article{MatPlast2020P353,
author = {Earar Kamel and Gurau Gabriela and Stefanescu Victorita and Carp Gabriel Bogdan and Pavel Liliana Lacramioara and Bosinceanu Dan and Hurjui Loredana Liliana and Murariu Alice and Berbece Sorin and Iordache Cristina and Balos Monica and Fulga Iuliu and Fratila Dragos Nicolae and Beznea Adrian},
title = {Improvement of Acrylic Resins Structure in Removable Prosthesis Base Polymerization},
journal = {Materiale Plastice},
volume = {57},
number = {4},
pages = {353-359},
year = {2020},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.20.4.5435},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5435}
}

Downloads number: 93

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page