Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression

Hrituc, Adelina; Mihalache, Andrei; Mares, Marian; Coteata, Margareta; Dodun, Oana; Nagit, Gheorghe; Slatineanu, Laurentiu

Adelina Hrituc, Andrei Mihalache, Marian Mares, Margareta Coteata, Oana Dodun, Gheorghe Nagit, Laurentiu Slatineanu

Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression

Abstract:
The form of the outer and inner surfaces of hollow spherical parts determines the developments of some particular categories of efforts during the compression tests. The overall purpose of the research presented in this paper was to study the behaviour of the hollow spherical parts under axial compression. The PLA hollow spherical parts were obtained by 3D printing and using distinct values for certain process input factors. The finite element method was used to theoretically investigate the behaviour of the parts and it highlighted the total plastic deformation of the test pieces. To experimentally verify the theoretical considerations, an L9 Taguchi orthogonal design was performed. The empirical mathematical model thus determined highlighted the stronger influence exerted by the printing plate temperature, printing speed, and part wall thickness.

Keywords:
Cave spherical part; Plastic material; 3D printing; Compression stress; Experimental tests; Mathematical model

Issue: 2020 Volume 57, Issue 1

Pages: 13-20

Publication date: 2020/4/17

https://doi.org/10.37358/MP.20.1.5307

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
HRITUC, A., MIHALACHE, A., MARES, M., COTEATA, M., DODUN, O., NAGIT, G., SLATINEANU, L., Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression, Mater. Plast., 57(1), 2020, 13-20. https://doi.org/10.37358/MP.20.1.5307

Vancouver
Hrituc A, Mihalache A, Mares M, Coteata M, Dodun O, Nagit G, Slatineanu L. Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression. Mater. Plast.[internet]. 2020 Jan;57(1):13-20. Available from: https://doi.org/10.37358/MP.20.1.5307

APA 6th edition
Hrituc, A., Mihalache, A., Mares, M., Coteata, M., Dodun, O., Nagit, G. & Slatineanu, L. (2020). Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression. Materiale Plastice, 57(1), 13-20. https://doi.org/10.37358/MP.20.1.5307

Harvard
Hrituc, A., Mihalache, A., Mares, M., Coteata, M., Dodun, O., Nagit, G., Slatineanu, L. (2020). 'Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression', Materiale Plastice, 57(1), pp. 13-20. https://doi.org/10.37358/MP.20.1.5307

IEEE
A. Hrituc, A. Mihalache, M. Mares, M. Coteata, O. Dodun, G. Nagit, L. Slatineanu, "Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression". Materiale Plastice, vol. 57, no. 1, pp. 13-20, 2020. [online]. https://doi.org/10.37358/MP.20.1.5307

Text
Adelina Hrituc, Andrei Mihalache, Marian Mares, Margareta Coteata, Oana Dodun, Gheorghe Nagit, Laurentiu Slatineanu,
Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression,
Materiale Plastice,
Volume 57, Issue 1,
2020,
Pages 13-20,
ISSN 2668-8220,
https://doi.org/10.37358/MP.20.1.5307.
(https://revmaterialeplastice.ro/Articles.asp?ID=5307)
Keywords: Cave spherical part; Plastic material; 3D printing; Compression stress; Experimental tests; Mathematical model

RIS
TY - JOUR
T1 - Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression
A1 - Hrituc, Adelina
A2 - Mihalache, Andrei
A3 - Mares, Marian
A4 - Coteata, Margareta
A5 - Dodun, Oana
A6 - Nagit, Gheorghe
A7 - Slatineanu, Laurentiu
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2020
VL - 57
IS - 1
SP - 13
EP - 20
UR - https://doi.org/10.37358/MP.20.1.5307
KW - Cave spherical part
KW - Plastic material
KW - 3D printing
KW - Compression stress
KW - Experimental tests
KW - Mathematical model
ER -

BibTex
@article{MatPlast2020P13,
author = {Hrituc Adelina and Mihalache Andrei and Mares Marian and Coteata Margareta and Dodun Oana and Nagit Gheorghe and Slatineanu Laurentiu},
title = {Mechanical Behaviour of 3D Printed PLA Hollow Spherical Parts Under Axial Compression},
journal = {Materiale Plastice},
volume = {57},
number = {1},
pages = {13-20},
year = {2020},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.20.1.5307},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5307}
}

Downloads number: 126

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page