Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode

Vasilescu, Mircea Dorin

Mircea Dorin Vasilescu

Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode

Abstract:
The aim of the work is conduct to highlight how the technological parameters has influence of 3D printed DLP on the generation of wheel, made from resin type material. In the first part of the paper is presents how to generate in terms of dimensional aspects specific design cylindrical gears, conical and worm gear. Generating elements intended to reduce the cost of manufacturing of these elements. Also are achieve the specific components of this work are put to test with a laboratory test stand which is presented in the paper in the third part of the paper. The tested gears generated by 3D-printed technique made with 3D printed with FDM or DLP technique. After the constructive aspects, proceed to the identification of conserved quantities, which have an impact both in terms of mechanical strength, but his cinematic, in order to achieve a product with kinematic features and good functional domain specific had in mind. The next part is carried out an analysis of the layers are generated using the DLP and FDM method using an optical microscope with magnification up to 500 times, specially adapted in order to achieve both visualization and measurement of specific elements. In the end part, it will highlight the main issues and the specific recommendations made to obtain such constructive mechanical elements.

Keywords:
3D printing; fabrication parts; generated gear; DLP material; DLP printing

Issue: 2019 Volume 56, Issue 2

Pages: 440-443

Publication date: 2019/6/30

https://doi.org/10.37358/MP.19.2.5203

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
VASILESCU, M.D., , Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode, Mater. Plast., 56(2), 2019, 440-443. https://doi.org/10.37358/MP.19.2.5203

Vancouver
Vasilescu MD. Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode. Mater. Plast.[internet]. 2019 Apr;56(2):440-443. Available from: https://doi.org/10.37358/MP.19.2.5203

APA 6th edition
Vasilescu, M.D., (2019). Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode. Materiale Plastice, 56(2), 440-443. https://doi.org/10.37358/MP.19.2.5203

Harvard
Vasilescu, M.D., (2019). 'Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode', Materiale Plastice, 56(2), pp. 440-443. https://doi.org/10.37358/MP.19.2.5203

IEEE
M.D. Vasilescu, "Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode". Materiale Plastice, vol. 56, no. 2, pp. 440-443, 2019. [online]. https://doi.org/10.37358/MP.19.2.5203

Text
Mircea Dorin Vasilescu,
Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode,
Materiale Plastice,
Volume 56, Issue 2,
2019,
Pages 440-443,
ISSN 2668-8220,
https://doi.org/10.37358/MP.19.2.5203.
(https://revmaterialeplastice.ro/Articles.asp?ID=5203)
Keywords: 3D printing; fabrication parts; generated gear; DLP material; DLP printing

RIS
TY - JOUR
T1 - Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode
A1 - Vasilescu, Mircea Dorin
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2019
VL - 56
IS - 2
SP - 440
EP - 443
UR - https://doi.org/10.37358/MP.19.2.5203
KW - 3D printing; fabrication parts; generated gear
KW - DLP material
KW - DLP printing
ER -

BibTex
@article{MatPlast2019P440,
author = {Vasilescu Mircea Dorin},
title = {Constructiv and Technological Consideration on the Generation of Gear Made by the DLP 3D-Printed Methode},
journal = {Materiale Plastice},
volume = {56},
number = {2},
pages = {440-443},
year = {2019},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.19.2.5203},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5203}
}

Downloads number: 0

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page