Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis

Pantazi, Aida; Totu, Eugenia Eftimie; Dorobantu, Dorel; Cristache, Corina Marilena; Enachescu, Marius

Aida Pantazi, Eugenia Eftimie Totu, Dorel Dorobantu, Corina Marilena Cristache, Marius Enachescu

Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis

Abstract:
The aim of the present paper was to characterize the new pink PMMA doped with 0.4% TiO2 nanoparticles utilized for denture base manufacturing as alternative to the one-piece, single color material for removable denture. The PMMA base material was structurally characterized through XRD, SEM, EDX, and subsequently by FT-IR and Raman spectroscopy. An improvement in the thermal stability of the obtained material compared with the PMMA matrix without filler was evidenced. All performed structural analyzes are recommending the new pink PMMA with 0.4% nano-titania as an as an alternative to the one-piece, single color material for removable dentures processing.

Keywords:
CAD/CAM denture; PMMA nanocomposite; denture base

Issue: 2018 Volume 55, Issue 4

Pages: 634-639

Publication date: 2018/12/30

https://doi.org/10.37358/MP.18.4.5091

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
PANTAZI, A., TOTU, E.E., DOROBANTU, D., CRISTACHE, C.M., ENACHESCU, M., Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis, Mater. Plast., 55(4), 2018, 634-639. https://doi.org/10.37358/MP.18.4.5091

Vancouver
Pantazi A, Totu EE, Dorobantu D, Cristache CM, Enachescu M. Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis. Mater. Plast.[internet]. 2018 Dec;55(4):634-639. Available from: https://doi.org/10.37358/MP.18.4.5091

APA 6th edition
Pantazi, A., Totu, E.E., Dorobantu, D., Cristache, C.M. & Enachescu, M. (2018). Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis. Materiale Plastice, 55(4), 634-639. https://doi.org/10.37358/MP.18.4.5091

Harvard
Pantazi, A., Totu, E.E., Dorobantu, D., Cristache, C.M., Enachescu, M. (2018). 'Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis', Materiale Plastice, 55(4), pp. 634-639. https://doi.org/10.37358/MP.18.4.5091

IEEE
A. Pantazi, E.E. Totu, D. Dorobantu, C.M. Cristache, M. Enachescu, "Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis". Materiale Plastice, vol. 55, no. 4, pp. 634-639, 2018. [online]. https://doi.org/10.37358/MP.18.4.5091

Text
Aida Pantazi, Eugenia Eftimie Totu, Dorel Dorobantu, Corina Marilena Cristache, Marius Enachescu,
Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis,
Materiale Plastice,
Volume 55, Issue 4,
2018,
Pages 634-639,
ISSN 2668-8220,
https://doi.org/10.37358/MP.18.4.5091.
(https://revmaterialeplastice.ro/Articles.asp?ID=5091)
Keywords: CAD/CAM denture; PMMA nanocomposite; denture base

RIS
TY - JOUR
T1 - Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis
A1 - Pantazi, Aida
A2 - Totu, Eugenia Eftimie
A3 - Dorobantu, Dorel
A4 - Cristache, Corina Marilena
A5 - Enachescu, Marius
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2018
VL - 55
IS - 4
SP - 634
EP - 639
UR - https://doi.org/10.37358/MP.18.4.5091
KW - CAD/CAM denture
KW - PMMA nanocomposite
KW - denture base
ER -

BibTex
@article{MatPlast2018P634,
author = {Pantazi Aida and Totu Eugenia Eftimie and Dorobantu Dorel and Cristache Corina Marilena and Enachescu Marius},
title = {Poly(methyl metacrylate) Nanocomposites for Two-piece CAD/CAM Solution as an Alternative to Monolithic Removable Prosthesis},
journal = {Materiale Plastice},
volume = {55},
number = {4},
pages = {634-639},
year = {2018},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.18.4.5091},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5091}
}

Downloads number: 0

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page