Materiale Plastice
Cite as: Mater. Plast.

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Materiale Plastice - Latest Issue

Latest Issue >>>
   Volume 60, 2023
   Volume 59, 2022
   Volume 58, 2021
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
<<<< back

Materiale Plastice (Mater. Plast.), Year 2016, Volume 53, Issue 4, 708-712

Alexandru Ghiban, Brandusa Ghiban, Nicolae Serban, Tudor Viorel Tiganescu

Hot Working Behaviour of a New Dental Alloy

Cobalt based alloys are widely used in medicine, the system CoCrMo being used for partial removable dentures realization. The extension of the applications for these alloys is based either on alloying of the tertiary system with new elements, or to the using of the plastic forming components. Titanium, which is well-known for its biocompatibility property, was used as an alloying element for the system CoCrMo in order to increase the physical-chemical properties of these alloys. Present paper has the aim of establishing the plastic forming behavior of the new alloy from the system CoCrMoTi, with 5.5%Ti, which will be possible used in dentistry. The experiments were realized in laboratory conditions, on a free falling dawn hammer, with high of free falling about H = 0.2 m,, and the falling dawn mass about 71 kg. The determinations were made in the range of temperatures about 1100 - 1250°C, at every 50°C. Finally, the graphics of plastic forming versus temperature and mechanical working versus temperature were drawn. The final conclusion was that the optimum range of temperature for hot working of the CoCrMoTi alloy is 1150 ÷ 1250°C, in which the plastic forming resistance and specific hot working are optimum.

cobalt based alloys; deformability; optimum range for plastic forming; partial removable dentures

Issue: 2016 Volume 53, Issue 4
Pages: 708-712
Publication date: 2016/12/30
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License

Downloads number: 0
<<<< back
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License