ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER NEWS, EVENTS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Journal Metrics
* Impact factor 2019: 1.517
* 5-Year IF: 1.179
* CiteScore: 2.4
* H index: 22
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 58, 2021
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2015, Volume 52, Issue 4,





ALEXANDRU BRAN, NICOLAE CONSTANTIN Heat Treatment by Applying Tempering at Low Temperature of WNR. 1.2083 Steel, Used in the Injection Molding of PBT Reinforced with up to 45% Fiberglass


Abstract:
This paper had as special-purpose rendering the enhancing of WNR. 1.2083 steel’s properties by vacuum heat treatment, in protective atmosphere, in order to find adequate solutions for the improvement of the tools destined for the injection molding of PBT reinforced with up to 45% fiberglass, for the total cost of a mold production project divided per the total number of the resulted pieces from that project to reach its minimum value. For that purpose to be achieved, the use of high performance steels with special alloying concept and distinct production technique is mandatory. Although the electroslag remelting process ensures a smaller number of non-metallic inclusions and a homogenous structure characterized by isotropic properties, this has to be extended after heat treatment also. By identifying the problems involved in the injection process PBT reinforced with up to 45% fiberglass, the right characteristics of the WNR. 1.2083 steel were established. In order for those characteristics to be reached, the execution of the proper heat treatment in vacuum furnaces, with protected atmosphere, will be presented in this paper. Keywords: reinforced PBT, fiberglass, heat treatment, vacuum, low tempering, distortion



Issue: 2015 Volume 52, Issue 4
Pages:
Publication date: 2015/12/30
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License