ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER NEWS, EVENTS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Journal Metrics
* Impact factor 2019: 1.517
* 5-Year IF: 1.179
* CiteScore: 2.4
* H index: 22
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 58, 2021
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2014, Volume 51, Issue 4,





VIRGIL ILIUTA, ADRIANA PREDA, GABRIEL ANDREI, IULIAN BIRSAN Evaluarea la uzura a unui material compozit ranforsat cu particule metalice prin testul in configuratia bila-pe-plan


Abstract:
In this study the results of the dry wear tests of composite material used to repair brass made parts are presented. The material belongs to Multimetall Messing category. It has a polymer matrix reinforced with Cu, Zn, Sn particles, and various allotropic forms of silicon dioxide (SiO2). This composite material was tribologically tested in dry friction reciprocating conditions, in ball-on-flat configuration, using the tribometer CETR-UMT-2. The counterpiece was a steel ball. The tests were performed at normal loads of 20, 30, 40 and 50N, over a distance of 100 m, at an average sliding speed of 3.5 mm/s, at room temperature and relative humidity of 50-60% . The results of the analysis were compared with the similar ones obtained under the same conditions for brass. Keywords: composite material, brass, wear track, profilometer, tribometer, reciprocating, ball-on-flat



Issue: 2014 Volume 51, Issue 4
Pages:
Publication date: 2014/12/30
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License