ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER NEWS, EVENTS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 60, 2023
   Volume 59, 2022
   Volume 58, 2021
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2010, Volume 47, Issue 4,





Gheorghe Radu Emil MAries Thermal Analysis of Some Physico - mechanical Properties of Polypropylene (PP) Used for Manufacturing of Performance Sport Items


Abstract:
This paper presents the influence of processing temperature on the physico-mechanical properties of polypropylene (PP) used at the injection molding of performance sport items. The test-pieces were molded at the following real injection temperatures: 220, 240, 260, 280 and 300°C. It was determined that the in-mould pressure decreases with the increase of processing temperature The thermal analysis performed were: TG, DSC and DMA. It was established that the processing temperature influences the thermal stability of the polymer molded at 300°C, but the vitrification temperature and the melting temperature are slightly influenced by the processing temperature. The storage modulus E’ is influenced by the processing temperature and stress frequency. Keywords: polypropylene (PP), injection molding, Thermogravimetry (TG), Differential Scanning Calorimetry (DSC), Dynamic-Mechanical Analysis (DMA)



Issue: 2010 Volume 47, Issue 4
Pages:
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License


Downloads number: 0
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License