ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER NEWS, EVENTS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 60, 2023
   Volume 59, 2022
   Volume 58, 2021
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2010, Volume 47, Issue 2,





Gheorghe Radu Emil MAries Thermal Analysis of Some Mechanical-Physical Properties of Polyoxymethylenes(POM) used for Manufacturing of Performance Sport Products


Abstract:
This paper presents the influence of the processing temperatures on the physical-mechanical properties of polyoxymethylenes (POM) used in injection molding of high performance sport products. The test-pieces were obtained by processing POM at the following temperatures: 180°C, 190°C, 200°C, 210°C, 220°C, 230°C and 240°C. It was established that the pressure in the mold decreases as the processing temperature increases. Further, thermal analyses (TG, DSC and DMA) were performed and it was noticed that the processing temperature had an influence on the thermal stability of the polymer, but the vitrification temperatures (Tv) and the melt temperatures (Tt) were poorly influenced by the processing temperature. Keywords: polyoxymethylene (POM), injection molding, Thermogravimetry (TG), Differential Scanning Calorimetry (DSC), Dynamic-Mechanical Analysis (DMA)



Issue: 2010 Volume 47, Issue 2
Pages:
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License


Downloads number: 0
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License