Fine Details Obtained by 3D Printing and Using Polymers

Slatineanu, Laurentiu; Dodun, Oana; Nagit, Gheorghe; Coteata, Margareta; Bosoanca, Gheorghe; Besliu, Irina

Laurentiu Slatineanu, Oana Dodun, Gheorghe Nagit, Margareta Coteata, Gheorghe Bosoanca, Irina Besliu

Fine Details Obtained by 3D Printing and Using Polymers

Abstract:
The three-dimensional printing is a manufacturing method involving the addition of materials by using certain principles valid in printing techniques. There are various techniques of a three-dimensional printing method and the most of them could be applied inclusively to generate objects of polymers. The objective of the research presented in this paper was to analyze the capabilities of 3D printing process or equipment of generating fine details and to identify a way of evaluating these capabilities when using polyester PLA as filament material. The systemic analysis of the printing techniques which use a fused polymer filament deposition showed that there are some groups of factors able to affect the obtaining of fine details. An experimental research was designed in order to highlight the influence exerted by the diameter of the nozzle orifice and by the values of sharp angles of isosceles triangles on the heights of these triangles, thus obtaining an image concerning the possibilities of generating sharp edges by three-dimensional printing. To evaluate the capacity of the 3D printing process of obtaining thin walls, a spiral including linear segments with a decreasing thickness from 1 mm was also achieved on the test piece. By mathematical processing of the experimental results using a specialized software, empirical mathematical models were determined to evaluate the intensity of influences exerted by the two process input factors on the heights corresponding to isosceles triangles characterized by sharp angles.

Keywords:
3D printing; polymer; fine details; influence factors; sharp edges; empirical models

Issue: 2018 Volume 55, Issue 4

Pages: 474-477

Publication date: 2018/12/30

https://doi.org/10.37358/MP.18.4.5056

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
SLATINEANU, L., DODUN, O., NAGIT, G., COTEATA, M., BOSOANCA, G., BESLIU, I., Fine Details Obtained by 3D Printing and Using Polymers, Mater. Plast., 55(4), 2018, 474-477. https://doi.org/10.37358/MP.18.4.5056

Vancouver
Slatineanu L, Dodun O, Nagit G, Coteata M, Bosoanca G, Besliu I. Fine Details Obtained by 3D Printing and Using Polymers. Mater. Plast.[internet]. 2018 Dec;55(4):474-477. Available from: https://doi.org/10.37358/MP.18.4.5056

APA 6th edition
Slatineanu, L., Dodun, O., Nagit, G., Coteata, M., Bosoanca, G. & Besliu, I. (2018). Fine Details Obtained by 3D Printing and Using Polymers. Materiale Plastice, 55(4), 474-477. https://doi.org/10.37358/MP.18.4.5056

Harvard
Slatineanu, L., Dodun, O., Nagit, G., Coteata, M., Bosoanca, G., Besliu, I. (2018). 'Fine Details Obtained by 3D Printing and Using Polymers', Materiale Plastice, 55(4), pp. 474-477. https://doi.org/10.37358/MP.18.4.5056

IEEE
L. Slatineanu, O. Dodun, G. Nagit, M. Coteata, G. Bosoanca, I. Besliu, "Fine Details Obtained by 3D Printing and Using Polymers". Materiale Plastice, vol. 55, no. 4, pp. 474-477, 2018. [online]. https://doi.org/10.37358/MP.18.4.5056

Text
Laurentiu Slatineanu, Oana Dodun, Gheorghe Nagit, Margareta Coteata, Gheorghe Bosoanca, Irina Besliu,
Fine Details Obtained by 3D Printing and Using Polymers,
Materiale Plastice,
Volume 55, Issue 4,
2018,
Pages 474-477,
ISSN 2668-8220,
https://doi.org/10.37358/MP.18.4.5056.
(https://revmaterialeplastice.ro/Articles.asp?ID=5056)
Keywords: 3D printing; polymer; fine details; influence factors; sharp edges; empirical models

RIS
TY - JOUR
T1 - Fine Details Obtained by 3D Printing and Using Polymers
A1 - Slatineanu, Laurentiu
A2 - Dodun, Oana
A3 - Nagit, Gheorghe
A4 - Coteata, Margareta
A5 - Bosoanca, Gheorghe
A6 - Besliu, Irina
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2018
VL - 55
IS - 4
SP - 474
EP - 477
UR - https://doi.org/10.37358/MP.18.4.5056
KW - 3D printing
KW - polymer
KW - fine details
KW - influence factors
KW - sharp edges
KW - empirical models
ER -

BibTex
@article{MatPlast2018P474,
author = {Slatineanu Laurentiu and Dodun Oana and Nagit Gheorghe and Coteata Margareta and Bosoanca Gheorghe and Besliu Irina},
title = {Fine Details Obtained by 3D Printing and Using Polymers},
journal = {Materiale Plastice},
volume = {55},
number = {4},
pages = {474-477},
year = {2018},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.18.4.5056},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5056}
}

Downloads number: 0

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page