Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study

Buduru, Smaranda; Mesaros, Anca; Culcitchi, Cristian; Moldovan, Marioara; Prodan, Doina; Szuhanek, Camelia

Smaranda Buduru, Anca Mesaros, Cristian Culcitchi, Marioara Moldovan, Doina Prodan, Camelia Szuhanek

Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study

Abstract:
The objective of this in-vitro study was to compare if there are any differences in the marginal fit of crowns fabricated by CAD/CAM technique. We used three different types of materials (two types of polymethylmetacrylate (PMMA) provided by two different manufacturers and one type of hybrid ceramic) and three different types of impressions: intraoral scanning, model scanning and conventional impression scanning. The crowns were subsequently measured with an electronic microscope at 1000X. Our results showed better results for the hybrid ceramic. The differences between the PMMA were not significant. There were no statistic differences with the ANOVA analysis between the scanning methods. Best combination in terms of marginal fit was found with hybrid ceramic and intraoral scanning.

Keywords:
marginal fit; intraoral scanner; model scanner; impression scanning; PMMA; hybrid ceramic; SEM

Issue: 2018 Volume 55, Issue 3

Pages: 376-379

Publication date: 2018/9/30

https://doi.org/10.37358/MP.18.3.5033

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
BUDURU, S., MESAROS, A., CULCITCHI, C., MOLDOVAN, M., PRODAN, D., SZUHANEK, C., Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study, Mater. Plast., 55(3), 2018, 376-379. https://doi.org/10.37358/MP.18.3.5033

Vancouver
Buduru S, Mesaros A, Culcitchi C, Moldovan M, Prodan D, Szuhanek C. Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study. Mater. Plast.[internet]. 2018 Jul;55(3):376-379. Available from: https://doi.org/10.37358/MP.18.3.5033

APA 6th edition
Buduru, S., Mesaros, A., Culcitchi, C., Moldovan, M., Prodan, D. & Szuhanek, C. (2018). Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study. Materiale Plastice, 55(3), 376-379. https://doi.org/10.37358/MP.18.3.5033

Harvard
Buduru, S., Mesaros, A., Culcitchi, C., Moldovan, M., Prodan, D., Szuhanek, C. (2018). 'Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study', Materiale Plastice, 55(3), pp. 376-379. https://doi.org/10.37358/MP.18.3.5033

IEEE
S. Buduru, A. Mesaros, C. Culcitchi, M. Moldovan, D. Prodan, C. Szuhanek, "Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study". Materiale Plastice, vol. 55, no. 3, pp. 376-379, 2018. [online]. https://doi.org/10.37358/MP.18.3.5033

Text
Smaranda Buduru, Anca Mesaros, Cristian Culcitchi, Marioara Moldovan, Doina Prodan, Camelia Szuhanek,
Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study,
Materiale Plastice,
Volume 55, Issue 3,
2018,
Pages 376-379,
ISSN 2668-8220,
https://doi.org/10.37358/MP.18.3.5033.
(https://revmaterialeplastice.ro/Articles.asp?ID=5033)
Keywords: marginal fit; intraoral scanner; model scanner; impression scanning; PMMA; hybrid ceramic; SEM

RIS
TY - JOUR
T1 - Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study
A1 - Buduru, Smaranda
A2 - Mesaros, Anca
A3 - Culcitchi, Cristian
A4 - Moldovan, Marioara
A5 - Prodan, Doina
A6 - Szuhanek, Camelia
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2018
VL - 55
IS - 3
SP - 376
EP - 379
UR - https://doi.org/10.37358/MP.18.3.5033
KW - marginal fit
KW - intraoral scanner
KW - model scanner
KW - impression scanning
KW - PMMA
KW - hybrid ceramic
KW - SEM
ER -

BibTex
@article{MatPlast2018P376,
author = {Buduru Smaranda and Mesaros Anca and Culcitchi Cristian and Moldovan Marioara and Prodan Doina and Szuhanek Camelia},
title = {Multivariate Assessment of Marginal Fit of Three Types of Dental Crowns Using Three Scanning Systems for CAD-CAM Technology - in vitro Pilot Study},
journal = {Materiale Plastice},
volume = {55},
number = {3},
pages = {376-379},
year = {2018},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.18.3.5033},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5033}
}

Downloads number: 0

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page