MIRCEA DORIN VASILESCU, TRAIAN FLESER INFLUENCE OF TECHNOLOGICAL PARAMETRS ON THE DIMENSION OF THREADED PARTS GENERATED WITH PLA MATHERIAL BY FDM 3D PRINTING In this research are establish the technology of 3D printable parts by the principle of FDM 3D printed for threaded made by PLA, ABS, Nylon or PETG. In the paper are present first the dimensional generation and specific aspects that need to be considered to produce threaded with internal teeth of the metric, round or trapezoidal type. Generating the threaded appeared as a necessity for the reconditioning or made of the components of the processing machines made both in the process of elaboration of the bachelorís and the laboratory works, with reduced energy resource consumption and low pollution as low as possible. After the construction, it is identify the dimension that have implications for both mechanical and kinematic resistance to make a product with good cinematic and functional characteristics. After that are made an analysis of the layers generated, both from the computer simulation and from the point of view of the analysis of layers physically generated for a threaded with internal teeth. At the end are presented which are necessary for operations to obtain a product with good features starting from two types of thread generated 8x2 and 10x2 moments.