ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER NEWS, EVENTS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 61, 2024
   Volume 60, 2023
   Volume 59, 2022
   Volume 58, 2021
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2016, Volume 53, Issue 1, 38-41



Dumitru Titi Cicic, Corneliu Rontescu, Catalin Gheorghe Amza , Oana Roxana Chivu, Gabriel Iacobescu

Qualitative and Quantitative Comparisons Concerning the Influence of Jointing Parameters on the Quality of the PPR Without Insertion Components Assembly


Abstract:
This paper presents the results of the research carried out in order to establish the optimum technology of polypropylene pipes, analysed from the point of view of temperature, time and labour press. Analysing the values obtained in the practical samples, the graphics of variation of components after assembly were traced, decreasing the diameter of the pipe after the assembly, the parameters that define significantly the quality of the assembly. The need to address such themes derived from the fact that in the literature, in the present time there are not sufficient and relevant information with regard to the assembly of pipes and connectors of PPR, most of the information being provided by the manufacturers and they are confined to the indication of the parameters of the assembly process.


Keywords:
assembly; polypropylene; ridge; temperature; shrink

Issue: 2016 Volume 53, Issue 1
Pages: 38-41
Publication date: 2016/3/30
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License


Downloads number: 0
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License